Send Email
Send SMS
Search
N.D. Automation
N.D. Automation


Level Sensors

Offering you a complete choice of products which include rf admitance level sensor, capacitance level sensor and conductivity level sensor.

RF Admitance Level Sensor

REQUEST CALLBACK

RF Admitance Level Sensor
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5,400 / UnitGet Latest Price

Product Details:
Shield MaterialStainless steel
Operating Temp100 deg for the integral switching vessel unit, 225 deg C for remote switching unit
Power Consumption1.9 VA

N.D.AUTOMATION is widely applied in various sensor. These comprise of a specially designed electronics and sensing probe using Driven Shield Coat Guard circuit and corresponding 3-Element Probe. The electro-mechanical combination of the Driven Shield technique makes the system immune to the material build-up on the probe and material bridging between the probe and the hopper wall. The measured signal does not flow to the hopper wall through the probe in the backward direction but flows only through the material.

 

The salient features of this level measuring instrument are as follow:

  • Three Element Coat Guard Technology
  • Can be configured either for High or Low Level point switching
  • Ignores material build-up on the probe
  • Suitable for the highly dusty environment
  • High Reliability
  • Fast and Easy Installation Simple Calibration
  • Field selectable operation logic
  • Provides economical solutions
  • Various models not required

The specifications of these point level sensor are as follow:


Sensing Unit:

  • Housing: Aluminum, weather proof, powder coated. Integral with The probe/ suitable for back panel mounting
  • Ambient temperature: 0 ° C to +60° C
  • Mains Voltage: 230/110 V AC (+/-15%), 50 Hz OR 18-55 V DC OR 65 TO 265 V AC.
  • Output: 1/2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads
  • Switching delay: Continuously adjustable From 1 to 20 sec. probe Free or probe covered (Optional)
  • Safety operation: Field selected switch over for min. or max. (FSL/FSH) switching points
  • Switch status display: Green LED shows Normal, Red LED shows alarm, Yellow
  • LED shows power on condition


Coat Guard Sensing Probe:

  • Mounting: Screwed 1 ½ BSP (standard) Or Flanged (optional)
  • Sense rod: Stainless steel
  • Insulation: PTFE (standard) other on request and as per application.
Yes! I am interested

Capacitance Level Sensor

REQUEST CALLBACK

Capacitance Level Sensor
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,000 / UnitGet Latest Price

Product Details:
MaterialMetal
IndicateFlow Rate, Total Flow
MediumLiquid, Air, Gas

Capacitance Level Sensor all metals and nonmetals. The switch is used for sending level of powder, granules and liquids. Capacitance Level Sensor is low cost level sensor for powders.
Yes! I am interested

Conductivity Level Sensor

REQUEST CALLBACK

Conductivity Level Sensor
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3,000 / UnitGet Latest Price

Product Details:
Response Time0.5 Sec
Power Consumption1.9 VA
Ambient Temperature0degree C to +60degree C

Conductivity Point Level Switches

Salient Features :

  • No moving part, free of maintenance.
  • No special cable required for signal transmission, ECONOMICAL to install.
  • Long cable connection permissible between probe and evaluation unit.
  • AC on probes for prevention of electrolytic deterioration of electrodes.
  • Low voltage on probe for operational safety.
  • Variety of control functions and installation system available, beside single point switching.
  • 1 Two point action for automatic pump control.
  • 2 Two point independent switching.
  • 3 Three point switching, two points with pump control logic and one independent point.
  • 4 Four point switching having two-pump control logic.
  • 5 Multichannel -4 point independent switching available for various process conditions

Variety of probes available for various process conditions.


TECHNICAL SPECIFICATIONS (STANDARD):

SWITCHING UNIT:

  • Housing: Aluminum, weather proof, powder coated. for back panel mounting /DIN Rail mounting
  • Cable entry: - As per housing option.
  • Mains Voltage: 230/110 V AC (+/-15%), 50 Hz or 24 V DC ,Or 65 to 265 V Ac
  • Output: 1 / 2 sets of potential free c/o contacts rated at 10 amps, 250 V AC for non-inductive loads.
  • Safety operation: Field selected switch over for min. or max. (FSL/FSH) switching points.
  • Switch status display: Green LED shows Normal, Red LED shows alarm.
Yes! I am interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
N.D. Automation
Dnyaneshwar Nagargoje (Owner)
Shree Industrial Premises, 1st Floor, General Block 111 Behind Radix Mould Dia Company, Philips Road, Near Masooba Mandir, Landewadi, Bhosari,
Pune - 411026, Maharashtra, India
Call Us: 
Call Response Rate: 93%
Share Us :
F G T L



Home  |   About Us   |  Products & Services  |  Site Map  |   Contact Us

© N.D. Automation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

N.D. Automation